Hero Image
Image
apply_2nd_coat

 

 

3 min

 

EasiFill 60, 45 and 20 – What’s the difference?

There’s no time wasted with Gyproc’s powder EasiFill range

Every decorator is always seeking an easy-to-use product to get the job done in optimum time and the Gyproc EasiFill range can help with just that. From quick patch up jobs, to full room projects, Gyproc EasiFill can help you achieve a smooth finish in a range of timeframes.

The Gyproc EasiFill range features Gyproc EasiFill 60, Gyproc EasiFill 45 and Gyproc EasiFill 20. You’ll have spotted these numbers and yes, you guessed right, this number relates to the recommended working time. 

Like any powder filler, easy-to-mix Gyproc EasiFill is the same – you simply add the mix to water until you reach the correct consistency, apply, allow to fully dry, then sand. Powder fillers set quickly, and this makes them suitable for filling deep holes as well as cracks and surface damage.

The full range adheres to paint effectively, with a choice of working times, which allows for larger areas and multiple rooms to be worked on. No time wasters here! When it comes to your finish, always check the painting manufacturer’s instructions for porous surfaces.

Surface preparation is important before applying and do bear in mind that atmospheric conditions can determine the length of drying time. For example, you’ll find that during the warmer summer months the product will dry quicker.

Large Jobs

Gyproc EasiFill 45

  • Powder material ideal for medium sized jobs
  • 45 minutes working time
  • The second coat can be applied after 80 minutes

Size: 10kg bags

Gyproc EasiFill 60

  • Powder material for large jobs and bigger rooms
  • Ideal for both bulk filling and finishing of plasterboard joints
  • 60 minutes working time
  • The second coat can be applied after 140 minutes

Size: 5 or 10kg bags

Small Jobs

The fast-setting time of EasiFill 20 makes it the ideal snagging solution. Its fast setting time and high coverage rate make it the ideal product for filling small holes, patches and cracks in plaster surfaces.

Gyproc EasiFill 20

  • Powder material for small jobs
  • Ideal for quick filling and snagging
  • 20 minutes working time
  • The second coat can be applied after 30 minutes

Size: 5 or 10kg bags