This finish coat plaster is suitable for low to medium suction backgrounds, especially plasterboard or Thistle DriCoat undercoat plaster.
If you have any questions or comments about Thistle plasters, please email them to email@example.com
* Coverage is based on 2mm thickness.
Yes, however the board usually needs to be primed with Thistle Bond-it. Read the full answer
We recommend 2°C (5°C for ThistlePro DuraFinish and Thistle DriCoat) as the minimum working temperature in which plaster should be applied. It is important that the temperature does not drop below 0°C during application or in the setting and drying phase.
Undercoat plasters are usually 11mm and most finish coat plasters are 2mm thick. Read the full answer.