Mending damaged floors

Concrete floor repair

Here’s an easy way of doing concrete floor repair

Use the Artex Easifix Floor Repair Kit for concrete floor repair. You’ll have all you need to repair damaged and uneven solid floors. Watch the video or follow the guide below.

Step by step guide...

Surface Preparation

Remove any loose material or debris from the floor and dampen the area with clean water.

Mixing

To prevent irritation to the skin, the use of the supplied gloves is recommended. Ensure the mixing bucket is clean and free from set pieces of floor compound. Gradually add 5kg of floor levelling compound to 1 litre of clean water. Mix for 2 minutes until a smooth flowing mix is achieved.

Application

The floor compound is suitable to cover a depth of 2 – 30mm. Pour the floor compound onto the floor.

Finishing

It is a self-levelling product, it does not require any further work. Clean tools and bucket using warm soapy water immediately after use.

Drying time

Allow at least 2 hours to cure.

Coverage

This kit is sufficient to repair 1m² when applied 3mm deep.

Storage

Store off the floor in a clean and dry environment as absorption of moisture can affect the performance of the product. If stored correctly, the shelf life is 12 months.

Related products...

Where to buy Artex Easifix products